Welcome to Zhongshan Sanying Plastic Product Co.,Ltd !



Contact us

Add:One of the first floor of No. 9 Xinsheng Third Street, Shenglong community, Gangkou Town, Zhongshan City

Pay attention to our official WeChat

Copyright(C)  Zhongshan Sanying Plastic Product Co.,Ltd 粤ICP备11068449号 Powered by www.300.cn中山

About us

  • 01

Search keywords:Mousse cover   Double cover   Flat cover   UV plating cover   Root flat cover   Round head



Pay attention to the vertical injection molding machine and the maintenance of common sense

Page view
People who use vertical injection molding machines should pay attention to their daily maintenance, mechanical life and seven points. Now let's see why we need to maintain your injection molding machine. First of all, in order to ensure the implementation of the machine's large performance state; secondly, timely and correct maintenance can guarantee and prolong the service life, reduce the number of maintenance and economic pay; the last point is very real, it is able to ensure the smooth production of production. Next I will explain the maintenance of machine from four angles.
1. Security agencies
(1) whether the ejection protective cover of the machine is normal at work, the safety of the periphery of the injection molding machine, and whether the safety door works normally.
(2) whether the bumper safety adjustment of injection molding machine is reliable when starting;
(3) the working of the air fan inside the machine is normal, the dust above is cleaned regularly, the electrical safety door is loose, the bolts of the high temperature protective cover of the barrel are fixed.
(4) whether the emergency brake button can work normally and check whether the performance of the electronic circuit is stable.
Two. Mechanical adjustment
(1) regularly check machine gears, formwork, lubricating oil path, keep clean and timely add lubricating oil.
(2) the machine balances the sliding feet, and the pads are evenly loaded, with a level of 0.2mm/m.
(3) the position adjustment of the machine console and the horizontal debugging of the whole machine.
(4) determine whether the electrothermal device on the dryer, pipe and mould is working normally.
Three. Electric computer
(1) check electrical insurance, line and computer parameters regularly.
(2) check whether the sensor is good and whether the signal is in place.
(3) 5S electrostatic precipitator is regularly carried out on the electronic control box.
Four. Hydraulic oil road
(1) regular testing of hydraulic, fuel tank and lubrication system;
(2) add lubricating oil to the moving parts of the machine.
(3) filter the hydraulic oil once every half year.
If you can apply the common sense of maintenance to daily use and nursing, believe that your machine can not only prolong life, but also use it well.